E6 PTP Work Center for woodworking
Pop-up pins for accurate positioning of workpiece
Pod and rail table that is divided into 2 work zones. This machine is mainly used to make solid wood door or for panel processing.
HSD spindle+Italian drill bank(9 vertical+6 horizontal +1 saw blade)
Carousel Tool Changer: 8 tools or more upon request, servo drives for faster and more
Scan the barcode and set this machine in motion
Italian OSAI Control: Control unit separate from the main electrical cabinet that promises better mobility and safety
◆ An all-rounder work center suitable for milling, routerting, drilling, side milling, sawing and other applications.
◆ Ideal for panel furniture, solid wood furniture, office furniture, wooden door productions, as well as other non-metal and soft metal applications.
◆ Double work zones guarantee non-stop work cycle–operator can load and unload workpiece on one zone without interrupting the machine operation on the other.
◆ Features worlds first class components and strict machining procedures.
|
SERIES |
E6-1230D |
E6-1252D |
| Traveling Size |
3400*1640*250mm |
5550*1640*250mm |
| Working Size |
3060*1260*100mm |
5200*1260*100mm |
| Table Size |
3060*1200mm |
5200*1260mm |
| Transmission |
X/Y rack and pinion drive; Z ball screw drive |
|
| Table Structure |
Pods and Rails |
|
| Spindle Power |
9.6/12KW |
|
| Spindle Speed |
24000r/min |
|
| Traveling Speed |
80m/min |
|
| Working Speed |
20m/min |
|
| Tool Magazine |
Carousel |
|
| Tool Slots |
8 |
|
| Drilling Bank Configuration |
9 vertical+6 horizontal+1 saw blade |
|
| Driving System |
YASKAWA |
|
| Voltage |
AC380/3PH/50HZ |
|
| Controller |
OSAI/SYNTEC |
|
E6 PTP Work Center for woodworking Related Video: